Tyan S8236 (S8236GM3NR) Spécifications télécharger pdf (Page 62)

http://www.tyan.com

3.4 PCI/PnP Menu

Clear NVRAM

Clear NVRAM during system Boot.

No / Yes

Plug & Play O/S

No: lets the BIOS configure all the devices in the system.

Yes: lets the operating system configure Plug and Play (PnP) devices not required

for boot if your system has a Plug and Play operating system.

No / Yes

PCI Latency Timer

This setting controls how many PCI clocks each PCI device can hold the bus before

another PCI device takes over. When set to higher values, every PCI device can

conduct transactions for a longer time and thus improve the effective PCI bandwidth.

Values in units of PCI clocks for PCI device latency timer register

64 / 32 / 96 / 128 / 160 / 192 / 224 / 248

Allocate IRQ to PCI VGA

Yes: assigns IRQ to PCI VGA card if card requests IRQ.

Yes / No

Palette Snooping

This is the default setting and should not be changed unless the VGA card

manufacturer requires Palette Snooping to be Enabled.

Enabled: informs the PCI devices that an ISA graphics device is installed in the

system so the card will function correctly.

Disabled / Enabled

BIOS Setup Utility

Main Advanced PCI/PnP Boot Security Chipset Exit

Advanced PCI/PnP Settings

WARING: Setting wrong values in below sections may

cause system to malfunction.

Clear NVRAM

Plug & Play O/S

PCI Latency Timer

Allocate IRQ to PCI VGA

Palette Snooping

PCI IDE BusMaster

[No]

[64]

[Yes]

[Disabled]

[Enabled]

Clear NVRAM during

System Boot.

← Select Screen

↑↓ Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Tyan S8236 (S8236GM3NR) Spécifications Page 62

Commentaires sur ces manuels

Produits connexes et manuels pour Cartes mères Tyan S8236 (S8236GM3NR)